|
^ 3-Sections of an 800 linear foot installation of LEED
Recycled Plastic Planters on a Park Avenue roof terrace.
View
Multi-Section Planter Installations
View Planter Installations
View LEED Recycled Plastic Lumber Planter Installations
Watch Video Tour of Park Avenue Installation
^ Detail of T-Leg joining two sections, and use of
multiple liners to fill a larger area. Lush
vegetation will
hide joints between liners.
BUDGETING: Our multi-section planters with a
21.5” height run approximately $190-$205/linear foot for
recycled plastic lumber, and $215-235 for solid
hardwoods, including commercial-grade molded plastic
liners. For a 31.5” height, add approximately 15%.
NOTE:
If you are considering WOOD planters,
please read
About Wood and Planter Care
Click to View sample
Multi-Section Planter
Assembly Instructions
> |
To create an over-sized planter
or an unlimited run of planters, our Multi-Section Planters
are easy to install and more cost-effective than
individual planters.
Your design calls for a
series of planters to line the parapet wall on a
rooftop, or to create a barrier around a space. Or
you need to fill a BIG space, but you don't want a
built-in planter, because you will need future access
for roof maintenance.
We created our
Multi-Section Planters for just those situations.
We combine our Mariner
corner with our Mariner T-leg to join lengths of wood,
recycled plastic lumber or other materials to build the
size you need.
For long, narrow planters,
we install a frame to support the liners. For
larger, deeper planters, the wooden box is a façade
around self-supporting liners.
We've even built a
one-sided façade for permanent installation along a
40-foot long wall—why
spend money on a beautiful planter wall that no one will
see?
Our multi-section planters
are more cost-effective than the same number of
individual planters because they require less material.
We can design the planters to use a combination of less
expensive standard molded liners, although custom liners
are always an option.
The planters ship flat on
a pallet, for lower shipping costs, and they typically
take 10-15 minutes per section to assemble. A
typical installation of over 400 linear feet of planters
in Manhattan was completed in just three days
(see pictures below).
^ Eleven sections of a
30-section run of Recycled
Plastic Lumber planters on a Manhattan rooftop.
(Weight before plant material: 16 lbs. / linear foot)
^ Assembly of first two
sections of the 26-section recycled plastic lumber
planter above. Customer elected to leave out
middle plank on hidden back side of planter to reduce
materials and costs. Each plank is labeled with planter
section for ease of assembly.
|
