DeepStream Designs     

                                                                                                                       

    Design without Limits

 

 

    BACK

 

  iHPP - Invisible Humane Pigeon Preventer

  Installation Kits and Instructions  

  Solid aluminum or steel railing

iHPP Kit: Order a minimum of 2 threaded solid stainless steel or aluminum 4 X 3/16 rods, per 10 with an additional rod for each turn or abrupt elevation drop. Match rod to railing type to prevent dialectic corrosion.  Estimate and order total distance for monofilament line.

 

4" Aluminum Rods for Aluminum railing:
$2.50 ea.
(iHPP-0204)

4"
Stainless Steel Rods for Steel railing:
 $3.50 ea.
(iHPP-0304)

 

Installation Tool Kit:

#25 drill bit: $2.70 (iHPP-0502)

3/16 bottom tap (if you cannot drill entirely through rail): $3.70 (iHPP-0511) OR

10-24NC through tap (if you can drill through rail): $ 3.70 (iHPP-0512)

Tap handle: $6.00 (iHPP-0504)

These may also be purchased at your local hardware store.

Total Kit Price: $12.40 (iHPP-0510)

 

Additional Tools Required:  Drill, oil of any type

Installation: Drill hole at desired angle to a minimum depth of 3/8, it is easier to tap if the hole is drilled completely through but this may not be practical.  Thread with oiled tap backing out and clearing metal chips often when resistance builds.  Tap until minimum 3/8 thread depth is achieved.  Repeat for all supports.  Thread monofilament line, tension slightly, tie knots.

 

 


Home  |  Our Design Philosophy  |  Design Gallery  |  Our Genesis

Planters  |  Recycling & Waste Receptacles  |  Pigeon Preventer   |   BionicHelm

In the Press  |  Contact Us
 

2699 Tigertail Avenue, #54, Miami, FL 33133

(305) 857-0466  Fax: (305) 854-3218

info@DeepStreamDesigns.com