|
iHPP -
Invisible Humane Pigeon
Preventer |
|
Installation Kits and
Instructions |
|
|
Steel or aluminum rail or lintel with a maximum double
cross section to 1 1/2” |
|
 |
 |
|
iHPP
Kit:
Order
a minimum of two threaded solid stainless steel or
aluminum 6” X 3/16” rods per 10 feet with an additional rod
for each turn or abrupt elevation drop. Longer and
shorter rods are available on special request. Match
rod material to railing type to prevent dialectic
corrosion. Estimate and order total distance for
monofilament line. |
|
 |
6"Aluminum Rods
for Aluminum railing:
$2.70 ea. (iHPP-0206)
6" Stainless Steel Rods for Steel railing:
$3.50 ea. (iHPP-0306)
Installation Tool Kit:
3/16”
drill bit for top hole: $1.80 (iHPP-0501)
#25 drill bit for threaded
bottom hole: $2.70 (iHPP-0502)
3/16” through tap:
$3.70 (iHPP-0503)
Tap handle:
$6.00 (iHPP-0504)
Total Kit Price:
$14.20 (iHPP-0500)
These
tools may also be purchased at your local hardware
store.
Additional Tools
Required:
Drill |
|
 |
Installation:
pick a
location for each hole that is not directly over a
stanchion or you may encounter obstacles.
|
|
 |
Drill a hole through both sections with
the smaller #25 drill bit.
In most installations, you want to be
sure to hold the drill straight and level so that the
rod will be straight. If you are off a bit, the rods
may be bent after installation.
|
|
 |
Because of the tap length you will have
to re-drill the top hole with the larger 3/16” bit to
accommodate the tap shank so that the tap will reach the
bottom hole to be threaded.
|
|
 |
Thread the bottom hole with the tap.
|
|
 |
Insert and thread the threaded rod. When
all rods have been installed, thread monofilament line
through the hole on top, tension slightly, tie knots.
|
